Shoe Materials
-
TPOP-2045 POLYOL 45%
Introduction: The polymer polyol TPOP-2045 POLYOL 45% is a kind of generalpolyether polyol as the parent, through styrene and acrylonitrile monomer and initiator, under thespecific temperature and nitrogen protection ofgraft copolymerizeation. This product is BHT free, amine free, low residual monomer and lowviscosity. The product has excellent yellowing and reddening resistance with solid content of morethan 45%. Using environmental protectionantioxidant, the product has a large processing tolerance. The prepared foam material has goodfluidity and even and fine bubbles. It is especiallysuitable for the production of soft high bearing block and thermoplastics foam.
-
TPOP-H45
Introduction: TPOP-H45 is a high activity polymer polyol. The product was prepared by graft copolymerization of high activity polyether polyol with styrene, acrylonitrile monomer and initiator under the protection of specific temperature and nitrogen. TPOP-H45 is a high activity, high solid content polymer polyol. Its viscosity is low , its stability is good, and its ST/AN residue is low. The foam made of it has good tear strength, tensile strength, high hardness and better opening property. It is the ideal raw material for producing high-grade polyurethane foam.
-
TEP-828 POLYOL 6000MW
Recommend: TEP-828Y POLYOL 6000MW polyther polyol is 3 functionality with high primary hydroxyl(POH>80%) polyether polyol. It is designed for the production of High Resilience flexible slabstock foams(HR SLABFORM)and mould High Resilience foams. lt is a BHT-free and Amine-free product.
-
TPOP-5050S POLYOL 50%
Introduction: Tpop-5050S POLYOL 50% is a kind of general polyether polyol as the parent, through styrene and acrylonitrile monomer and initiator, under the specific temperature and nitrogen protection of graft copolymerization. ThisproductisBHT free, amine free,low residual monomer, low viscosity, high solid content polymer polyol,solid content ofmore than 49%;the product has anti yellowing, red change, excellent performance,The use of environmental protection antioxidants,the product processing tolerance is large, the preparation of foam material liquidity is good,the finished, product bubble hole is uniform and fine, especially suitable for the producing of soft high bearing block and hot mold form and other fields.
-
TPOP-3630G
Introduction: TPOP-36/30G is a high activity polymer polyol. The product was prepared by graft copolymerization of high activity polyether polyol with styrene, acrylonitrile monomer and initiator under the protection of specific temperature and nitrogen. TPO-36/30G is a kind of polymer polyol with high activity and high solid content. It has low viscosity, good stability and low ST/AN residue. It is suitable for producing high hardness and high elasticity products. It is an ideal raw material for producing high-grade polyurethane foam.
-
TPOP-3628
Introduction: TPOP-36/28 is a high activity polymer polyol. The product was prepared by graft copolymerization of high activity polyether polyol with styrene, acrylonitrile monomer and initiator under the protection of specific temperature and nitrogen. TPO-36/28 is a kind of polymer polyol with high activity and high solid content. It has low viscosity, good stability and low ST/AN residue. It is suitable for producing high hardness and high elasticity products. It is an ideal raw material for producing high-grade polyurethane foam.