Products
-
TPOP-5058 POLYOL 50%
Introduction: Tpop-5058 POLYOL 50% is a kind of general polyether polyol as the parent, through styrene and acrylonitrile monomer and initiator, under the specific temperature and nitrogen protection of graft copolymerization. ThisproductisBHT free, amine free,low residual monomer, low viscosity, high solid content polymer polyol,solid content ofmore than 49%;the product has anti yellowing, red change, excellent performance,The use of environmental protection antioxidants,the product processing tolerance is large, the preparation of foam material liquidity is good,the finished, product bubble hole is uniform and fine,especially suitable for the producing of soft high bearing block and hot mold form and other fields.
-
TPOP-3630G
Introduction: TPOP-36/30G is a high activity polymer polyol. The product was prepared by graft copolymerization of high activity polyether polyol with styrene, acrylonitrile monomer and initiator under the protection of specific temperature and nitrogen. TPO-36/30G is a kind of polymer polyol with high activity and high solid content. It has low viscosity, good stability and low ST/AN residue. It is suitable for producing high hardness and high elasticity products. It is an ideal raw material for producing high-grade polyurethane foam.
-
TPOP-3628
Introduction: TPOP-36/28 is a high activity polymer polyol. The product was prepared by graft copolymerization of high activity polyether polyol with styrene, acrylonitrile monomer and initiator under the protection of specific temperature and nitrogen. TPO-36/28 is a kind of polymer polyol with high activity and high solid content. It has low viscosity, good stability and low ST/AN residue. It is suitable for producing high hardness and high elasticity products. It is an ideal raw material for producing high-grade polyurethane foam.
-
TPOP-2013
Recommend: TPOP-2013 polyol is a unique grafted polyether polyol containing copolymerized styreneand acrylonitrile,its solid content is 13%.lt is manufactured without the use of BHT. TPOP-2013 polyol is designed for use to increase foam hardness in the manufacture of slabstock foam and VE memory foam. It can be used to produce high-load-bearingfoams over a wide density range. TPOP-2013 can be used in formulations utilizing all TDI,TDI/PoiymericMDl blends or all Polymeric MDl compositions.
-
TPOP-2020
Introduction: The polymer polyol Tpop-2020 is a kind of general polyether polyol as the parent, through styrene and acrylonitrile monomer and initiator, under the specific temperature and nitrogen of graft copolymerizeation. This product is BHT free, amine free, low residuer monomer, low residue monomer, low viscosity, the product has excellent, the use environment friendly antioxidant, the product processing tolerance is large, the preparation of foamed materials fluidity, bubble even and delicate, suitable for producing soft high load block and hot plastic foam and other fields.
-
TEP-210
Recommend: TEP-210 polyol is a propylene glycol propoxylated polyether polyol with an average molecular weight of 1000, BHT and amine free. lt is mainly used for elastomer,sealant. water, potassium content, acid number, pH is strictly con-trolled during producing TEP-210. When NCO content of polyurethane prepolymers is very low. Prepolymers doesn’t happen to gelatinate.