Furniture
-
TPOP-2010 POLYOL 10%
Introduction: The polymer polyol TPOP-2010 POLYOL 10% is a kind of general polyether polyol as the parent, through styrene and acrylonitrile monomer and initiator, under the specific temperature and nitrogen of graft copolymerizeation. This product is BHT free, amine free, low residuer monomer, low residue monomer, low viscosity, the product has excellent, the use environment friendly antioxidant, the product processing tolerance is large, the preparation of foamed materials fluidity, bubble even and delicate, suitable for producing soft high load block and hot plastic foam and other fields.
-
TPOP-2045 POLYOL 45%
Introduction: The polymer polyol TPOP-2045 POLYOL 45% is a kind of generalpolyether polyol as the parent, through styrene and acrylonitrile monomer and initiator, under thespecific temperature and nitrogen protection ofgraft copolymerizeation. This product is BHT free, amine free, low residual monomer and lowviscosity. The product has excellent yellowing and reddening resistance with solid content of morethan 45%. Using environmental protectionantioxidant, the product has a large processing tolerance. The prepared foam material has goodfluidity and even and fine bubbles. It is especiallysuitable for the production of soft high bearing block and thermoplastics foam.
-
TPOP-2015 POLYOL 15%
Introduction: The polymer polyol TPOP-2015 POLYOL 15% is a kind of general polyether polyol as the parent, through styrene and acrylonitrile monomer and initiator, under the specific temperature and nitrogen of graft copolymer izeation. This product is BHT free, amine free, low residuer monomer, low residue monomer, low viscosity, the product has excellent, the use environment friendly antioxidant, the product processing tolerance is large, the preparation of foamed materials fluidity, bubble even and delicate, suitable for producing soft high load block and hot plastic foam and other fields.
-
TPOP-H45
Introduction: TPOP-H45 is a high activity polymer polyol. The product was prepared by graft copolymerization of high activity polyether polyol with styrene, acrylonitrile monomer and initiator under the protection of specific temperature and nitrogen. TPOP-H45 is a high activity, high solid content polymer polyol. Its viscosity is low , its stability is good, and its ST/AN residue is low. The foam made of it has good tear strength, tensile strength, high hardness and better opening property. It is the ideal raw material for producing high-grade polyurethane foam.
-
TEP-545SL POLYOL 3000MW
Introduction: TEP-545SL POLYOL 3000MW is produced by using bimetallic catalyst. Different from the traditional polyether polyol production technology, bimetallic catalyst can be used to produce high molecular weight polyether polyol with narrow molecular weight distribution and low unsaturation. This product is suitable for producing all kinds of sponges with low density to high density. The products prepared by TEP-545SL have better physical properties.
-
TEP-330N POLYOL 5000MW
Introduction: TEP-330N POLYOL 5000MW is a kind of high activity polyether polyol. It is a kind of fast reaction polyether polyol with high reaction activity, high molecular weight and high primary hydroxyl content. It is suitable for producing high resilience polyurethane soft foam, especially for preparing polyurethane foam, high quality cold curing polyurethane foam, self foaming foam and other uses. The results show that TEP-330N has higher activity than other polyether, and its foam has better physical properties.
-
TPOP-2025 POLYOL 25%
Introduction: The polymer polyol Tpop-2025 is a kind of general polyether polyol as the parent, through styrene and acrylonitrile monomer and initiator, under the specific temperature and nitrogen of graft copolymerizeation. This product is BHT free, amine free, low residuer monomer, low residue monomer, low viscosity, the product has excellent, the use environment friendly antioxidant, the product processing tolerance is large, the preparation of foamed materials fluidity, bubble even and delicate, suitable for producing soft high load block and hot plastic foam and other fields.
-
TPOP-5058 POLYOL 50%
Introduction: Tpop-5058 POLYOL 50% is a kind of general polyether polyol as the parent, through styrene and acrylonitrile monomer and initiator, under the specific temperature and nitrogen protection of graft copolymerization. ThisproductisBHT free, amine free,low residual monomer, low viscosity, high solid content polymer polyol,solid content ofmore than 49%;the product has anti yellowing, red change, excellent performance,The use of environmental protection antioxidants,the product processing tolerance is large, the preparation of foam material liquidity is good,the finished, product bubble hole is uniform and fine,especially suitable for the producing of soft high bearing block and hot mold form and other fields.
-
TPOP-3630G
Introduction: TPOP-36/30G is a high activity polymer polyol. The product was prepared by graft copolymerization of high activity polyether polyol with styrene, acrylonitrile monomer and initiator under the protection of specific temperature and nitrogen. TPO-36/30G is a kind of polymer polyol with high activity and high solid content. It has low viscosity, good stability and low ST/AN residue. It is suitable for producing high hardness and high elasticity products. It is an ideal raw material for producing high-grade polyurethane foam.
-
TPOP-3628
Introduction: TPOP-36/28 is a high activity polymer polyol. The product was prepared by graft copolymerization of high activity polyether polyol with styrene, acrylonitrile monomer and initiator under the protection of specific temperature and nitrogen. TPO-36/28 is a kind of polymer polyol with high activity and high solid content. It has low viscosity, good stability and low ST/AN residue. It is suitable for producing high hardness and high elasticity products. It is an ideal raw material for producing high-grade polyurethane foam.
-
TPOP-2013
Recommend: TPOP-2013 polyol is a unique grafted polyether polyol containing copolymerized styreneand acrylonitrile,its solid content is 13%.lt is manufactured without the use of BHT. TPOP-2013 polyol is designed for use to increase foam hardness in the manufacture of slabstock foam and VE memory foam. It can be used to produce high-load-bearingfoams over a wide density range. TPOP-2013 can be used in formulations utilizing all TDI,TDI/PoiymericMDl blends or all Polymeric MDl compositions.
-
TPOP-2020
Introduction: The polymer polyol Tpop-2020 is a kind of general polyether polyol as the parent, through styrene and acrylonitrile monomer and initiator, under the specific temperature and nitrogen of graft copolymerizeation. This product is BHT free, amine free, low residuer monomer, low residue monomer, low viscosity, the product has excellent, the use environment friendly antioxidant, the product processing tolerance is large, the preparation of foamed materials fluidity, bubble even and delicate, suitable for producing soft high load block and hot plastic foam and other fields.